Home page

Products

Telephone:+86 0391-8987988

Mobile:+8613598529809

Mailbox:liyao7979@163.com

Address: North of the next phase of Chengcun, Hongchang Sub-district Office, Boai County, Jiaozuo City, Henan Province

XHGG501A2 Cable Fault Tester

Key words:

XHGG501A2 Cable Fault Tester

XHGG501A2

Cable Fault Tester

Cable

Fault

Tester

Fault Tester

instrument

measurement

supply

cable

Products

computer

operation

technology

method

Key words:

XHGG501A2 Cable Fault Tester

Classification:

Products

Product Consulting:

0086-19591686205

Inquiry

Product description

Product Overview
The cable fault tester uses an industrial-grade 12.1-inch touch-screen integrated computer, equipped with industrial-grade integrated circuits and large-capacity lithium-ion batteries. It is easy to operate, stable and reliable. The instrument integrates electronic technology and computer technology, supports signal filtering, acquisition, processing and graphic analysis, and can complete cable speed measurement, length testing and fault distance detection. It is suitable for power cables, high-frequency coaxial cables, street light cables, and underground wires with different cross-sections and media, covering low-resistance/short-circuit/open-circuit faults, high-resistance leakage and high-resistance flashover faults. The technical parameters meet the requirements of GB/T 18268.1, DL/T 849.1-2019, and JJF1042-2020 standards.

Product Features
• 12.1-inch industrial-grade computer control, touch-screen operation mode;
• XP operating system, convenient operation mode;
• With the function of measuring wave velocity and fault distance;
• Fully automatic continuous sampling, waveform capture is timely and accurate;
• The instrument adopts the latest technology of embedded industrial computer and has both impact high-voltage flashover method and low-voltage pulse method;
• It has user-friendly software and full Chinese menu and screen touch button operation. The button definition is simple and clear. The measurement method is simple and fast;
• The success rate of fault detection, test accuracy and test convenience are better than any domestic detection equipment;
• The ultra-high brightness and ultra-large LCD screen is used as the display terminal, and the screen waveform can be clearly observed in the environment of direct sunlight. The instrument has powerful data processing capabilities and a friendly display interface;
• It has a massive test waveform storage function: the waveform tested on site can be conveniently stored in the instrument in the prescribed order for observation at any time;
• It has a standard printer USB interface;
• Simple operation and high reliability. It has a very high cost-effectiveness;
• Built-in polymer lithium battery power supply, which can test cable open circuit and low-resistance short circuit faults in a power-free environment.

Technical parameters
• Sampling frequency: 400MHz;
• Low voltage pulse amplitude: 400V;
• Pulse width: 0.25uS/2uS/4uS;
• Minimum resolution: 0.1m;
• Test blind area: ≤10m;
• Ranging range: ≥68km;
• Measurement error: ≤±(0.5%×L+1m), L is the cable length;
• Test cable length is set as: <1km (short distance); <3km (medium distance); >3 km (long distance);
• Power supply: charging AC110V~240V, 50Hz/60Hz;
Built-in 10400mAH lithium battery for power supply;
• Working conditions: temperature -20℃～+65℃, relative humidity 90%, atmospheric pressure 750±30mmHg;
• Volume: 430Lmm×380Wmm×220Hmm
• Weight Quantity: 10kg