Home page

Products

Telephone:+86 0391-8987988

Mobile:+8613598529809

Mailbox:liyao7979@163.com

Address: North of the next phase of Chengcun, Hongchang Sub-district Office, Boai County, Jiaozuo City, Henan Province

XHGG501X Cable Fault Tester

1. Supports independent sampling of ABC three-phase cables and synchronous waveform display, which is convenient for three-phase waveform comparison; it has output pulse speed adaptation and waveform automatic analysis functions, and is easy to operate. 2. As a special instrument for power cable status detection and fault distance measurement, it integrates modern electronic and computer technologies, and realizes signal filtering, acquisition, processing and waveform analysis through high-speed sampling and narrow output pulses (small blind area), completing cable length and fault distance testing. 3. It is suitable for power cables, coaxial cables, street light cables, underground wires, etc. with different cross-sections and media, and supports low-resistance, short-circuit, open-circuit and disconnection fault detection; technical parameters meet the requirements of DL∕T 849.1 and JJF1042 standards.

Key words:

ABC three-phase cables

XHGG501X Cable Fault Tester

Cable Fault Tester

XHGG501X

XHGG501D Cable Fault Tester

cable

fault

distance

cables

three-phase

pulse

power

Products

Key words:

XHGG501X Cable Fault Tester

Classification:

Products

Product Consulting:

0086-19591686205

Inquiry

Product description

Product Overview
1. Supports independent sampling of ABC three-phase cables and synchronous waveform display, which is convenient for three-phase waveform comparison; it has output pulse speed adaptation and waveform automatic analysis functions, and is easy to operate.
2. As a special instrument for power cable status detection and fault distance measurement, it integrates modern electronic and computer technologies, and realizes signal filtering, acquisition, processing and waveform analysis through high-speed sampling and narrow output pulses (small blind area), completing cable length and fault distance testing.
3. It is suitable for power cables, coaxial cables, street light cables, underground wires, etc. with different cross-sections and media, and supports low-resistance, short-circuit, open-circuit and disconnection fault detection; technical parameters meet the requirements of DL∕T 849.1 and JJF1042 standards.

Product Features
1. Industrial-grade 7-inch LCD display, computer control, touch operation mode;
2. With the function of measuring length and fault distance;
3. Fully automatic continuous sampling, waveform capture is timely and accurate;
4. With low-voltage pulse method;
5. Built-in large-capacity battery pack, easy to use;
6. Adopt protective chassis, not less than IP54.

Technical parameters
1. Test length: not less than 50km;
2. Test blind area: 10m;
3. Sampling speed: 10MHz, 20MHz, 50MHz, 100MHz, 200MHz;
4. Pulse width: 1us, 0.75us, 0.5us, 0.2us, 0.1us;
5. Pulse amplitude: 400V;
6. Resolution: 0.1m;
7. Built-in power supply: It can work continuously for 8 hours after being fully charged, and can also work with external AC power supply;
8. Working conditions: temperature 0℃～+45℃, relative humidity 70%, atmospheric pressure 750±30mmHg;
9. Volume: 280Lmm×230Wmm×120Hmm.
10. Weight: 2.3kg