tester
Key words:
The cable fault tester uses an industrial-grade 10.1-inch touch-integrated computer with a simple operating software interface to achieve human-computer interactive testing. It uses industrial-grade integrated circuits and devices, and has a built-in large-capacity lithium-ion battery, which is stable, reliable, and easy to use. This cable fault tester is a special instrument for measuring and analyzing the status and fault distance of power cables. This cable fault tester combines modern electronic technology and computer technology to achieve signal filtering, acquisition, data processing, graphic display, and graphic analysis to complete cable speed measurement, cable length testing, and cable fault distance testing. This cable fault tester is suitable for low-resistance, short-circuit, open-circuit and broken-wire faults of power cables, high-frequency coaxial cables, street light cables, and underground wires of various materials with different cross-sections and different media, as well as high-resistance leakage and high-resistance flashover faults. The technical parameters comply with the requirements of "GB/T 18268.1 Anti-interference requirements for test equipment for industrial sites", "DL ∕ T 849.1-2019 General technical conditions for special testers for power equipment Part 1: Cable fault flash detector", and "JJF1042-2020 Cable fault tester calibration specification".
The circuit fault tester is equipped with an industrial-grade 10.1-inch touchscreen all-in-one computer and features a simple operation software interface to achieve human-machine interactive testing. It utilizes industrial-grade integrated circuits and components, with a built-in high-capacity lithium-ion battery, ensuring stable reliability and convenient use. This circuit fault tester is a specialized instrument for measuring and analyzing the status and fault distance of power cables. By integrating modern electronic technology with computer technology, it realizes functions such as signal filtering, acquisition, data processing, graphical display, and graphical analysis to complete tests including cable velocity measurement, cable length testing, and cable fault distance measurement. This device is applicable to various power cables (of different cross-sections and dielectric materials), high-frequency coaxial cables, street lamp cables, and underground wires. It can test low-resistance, short-circuit, open-circuit, and broken-wire faults, as well as high-resistance leakage faults and high-resistance flashover faults. Its technical parameters comply with the requirements of the following standards: GB/T 18268.1 Requirements for the Interference Immunity of Test Equipment for Industrial Premises, DL/T 849.1-2019 General Technical Conditions for Specialized Testers for Electrical Equipment Part 1: Cable Fault Flash Detectors, and JJF 1042-2020 Calibration Specification for Circuit Fault Testers.
The cable fault tester uses an industrial-grade 12.1-inch touch-screen all-in-one computer for easy operation. It has built-in industrial-grade circuits and large-capacity lithium batteries, which are stable and convenient. As a special detection equipment for power cable status and fault distance, it integrates modern electronic and computer technologies, supports signal filtering, acquisition, processing and graphic analysis, and can measure cable speed, length and fault distance. It is suitable for power cables, high-frequency coaxial cables, street light cables, etc. with different cross-sections/media, covering low-resistance short circuit/open circuit, high-resistance leakage/flashover faults, and complies with GB/T 18268.1, DL/T 849.1-2019, JJF1042-2020 and other standards.
The cable fault tester is a special instrument designed for power cable fault testing. It is easy to operate (touch-type software interface + single-chip centralized control), built-in large-capacity lithium battery, stable and portable. It uses modern electronic technology to achieve signal filtering, acquisition, processing and graphic analysis, supports fault distance, length, speed measurement and resistance detection, and is suitable for low-resistance, short-circuit, open-circuit and high-resistance (leakage/flashover) fault testing of various types of cables such as power cables, coaxial cables, street light cables, and underground wires. The technical parameters meet the requirements of DL/T 849.1 and JJF1042 standards.
Latest Products
Contact Us
Rome Jingfu Cheng Community, No. 10 Zhangba Road, Zhangba Street, High-tech Zone, Xi 'an City, Shaanxi Province,China
Mobile Phone Site
SAF Coolest v1.3.1.2 设置面板 OGVSD-ZQUO-GXSSE-AXE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page